Scheme
ANALYSIS OF BITUMINOUS MATERIALS
Location				Date		Equipment Check
Description	28mm Dense Bituminous Roadbase			Operator		Calibration Check
Source				Sample No.		Sieve Check
Test No: 110/111/112/115* Delete as appropiate Spec: BS598 Part 102
Temperature of Solvent                   t1 =       0C				Temperature of Aliquot t2 =  0C Diff =< 3 deg
Flask Number			g
Weight of Silica Gel			g
Weight of Aggregate			g
Weight of Filter Papers
S.G. of Binder			g	D	1
Weight of Sample			ml	W	2977.1
Volume of Solvent			ml	V	3000
Volume of Aliquot			g	U	25.0
Weight of Flask + Binder Recovered			g		0.929	0.919
Weight of Empty Flask			g		0.000	0.000
Weight of Binder Recovered			g		0.929	0.919
Mean weight of Binder Recovered				z	0.924
	S = ((10000zV)/(UW(100))) * (1 + (z/DU)			%	3.86		3.46	Adjusted
Riffle Factor	B.S.Sieve	Max Wt.	Retained Weight	Total	Per Cent Retained	Per Cent Passing	Specification
2862.12	50 mm	5000	0.00			100.00	100		.									100	100
	37.5 mm	4000	0.00	0.00	0.00	100.00	100					Min	Max	Binder	Min	Max	Filler	95	100
	28 mm	3000	286.70	286.70	10.02	89.98	90 - 100					0	0.5	0	0	0.5	0	70	94
	20 mm	2500	288.40	288.40	10.08	79.91	71 - 95		.			0.5	1.4	0.1	0.5	1.4	0.1
	14 mm	2000	141.90	141.90	4.96	74.95	58 - 82					1.5	2.4	0.2	1.5	2.4	0.3	56	76
	10 mm	1500	0.00	0.00	0.00	74.95			.			2.5	3.4	0.3	2.5	3.4	0.4
	6.3 mm	1000	591.40	591.40	20.66	54.29	44 -  60					3.5	4.4	0.4	3.5	4.4	0.6	44	60
1396.70	5 mm	750			0.00	54.29			.			4.5	5.4	0.5	4.5	5.4	0.7
171.50	3.35 mm	250	40.30	40.30	11.47	42.82	32 -  46				3.82	5.5	6.4	0.6	5.5	6.4	0.9	32	46
8.14	2.36 mm	200	0.00	0.00	0.00	42.82			.		3.8185028	6.5	7.4	0.7	6.5	7.4	1
	1.18 mm	125	0.00	0.00	0.00	42.82			.		0.4	7.5	8.4	0.8	7.5	8.4	1.2
	600 um	100	0.00	0.00	0.00	42.82			.		0.6	8.5	9.4	0.9	8.5	9.4	1.3
	300 um	65	110.10	110.10	31.33	11.49	7 -  21					9.5	10.4	1	9.5	10.4	1.5	7	21
	212 um	60	0.00	0.00	0.00	11.49			.
	150 um	50	0.00	0.00	0.00	11.49			.
	75 um	30	20.10	20.10	5.72	5.77	2 -  9											2	9
	Passing 75 um		1.90			5.17	Adjusted		.
									.
Constituent		Weight		Per Cent		Specification
Binder
Filler
Fine Aggregate
Coarse Aggregate
				Remarks/Condition....................................
				Checked by..........................Senior Technician