| Laboratory Test Sheet |
| Consolidation Test |
| Client : Site : |
| Client Ref : Lab. Ref : Job No : Date Received : |
| Supplier : Source : |
| Material Type : Specification : |
| Material Name : Stone Type : |
| Moisture Content (from trimmings) % |
| Final Specimen |
| Moisture Content (measured) % |
| Height of Solids Hs mm |
| Water g |
| Degree of Saturation % |
| Dry Soil g |
| Voids Ratio |
| Wet Soil g |
| Dry Density Mg/m3 |
| Ring + Tray g |
| Density Mg/m3 |
| Dry Soil + ring + tray g |
| Wet Soil + Ring + Tray g |
| (a) |
| mo |
| Initial Specimen |
| Weighings |
| Height H mm |
| Area A mm2 |
| Diameter D mm |
| Preparation Method |
| (b) |
| Specimen |
| Change |
| (c) |
| Specimen |
| Specimen |
| Dimension |
| Final |
| Overall |
| Ho |
| Initial |
| Mean daily Temperature C |
| Increment no./dat started |
| Load kg/lb*pressure kPa |
| Clock |
| Time |
| t |
| h |
| Gauge |
| s |
| Reading |
| Elapsed Time |
| Cumulative |
| m |
| Compression |
| tmin |
| %mm dH |
| Volume V cm3 |
| mo |
| md |
| Wo |
| eo |
| So |
| md |
| * Delete as appropriate |
| (a) Using moisture content from trimmings |
| (b) Using data from (a) and (c) |
| (c) Data from specimen after test |
| Test Method BS 1377 : Part 5 : 1990 |
| Machine No. |
| Cell No. |
| Ring No. |
| Specimen Diameter mm |
| Lever Ratio :1 |
| 1 kg/lb * on hanger give pressure of |
| Height mm |
| Area mm2 |
| kPa |
| Clock |
| Time |
| Gauge |
| Reading |
| Cumulative |
| Compression |
| Clock |
| Time |
| Gauge |
| Reading |
| Cumulative |
| Compression |
| %mm dH |
| %mm dH |
| Cumulative correction y |
| Net cumulative |
| Compression (dH - y) |
| Comments : |
| Tested By : Date : Checked By : Date : |
| Check Level (1/2/3) |
| Notes : * Delete as applicable |