Laboratory Test Sheet |
LOSS ON IGNITION - BS 1377 Part 34: 1990 |
Client : Site : |
Client Ref : Lab. Ref : Job No : Date Received : |
Supplier : Source : |
Material Type : Specification : |
Material Name : Stone Type : |
Equipment Check ................................................................................... |
Calibration Check ................................................................................... |
Sieve Check ............................................................................................ |
Compaction Spec. ................................................................................... |
Crucibles in Kiln 440 +/- 25C > 1hr Time in Time out |
Weight of Crucibles Mc to 0.001g Mc 1 g Mc 2 g |
Record weights to the nearest 0.1% for preparation of sample. |
Weight of Wet Sample g Weight when dried at 50 +/- 2.5C M1 g |
Weight passing 2mm Sieve M2 g TEST 1 TEST 2 |
Weight of prepared samples in crucibles 1 g 2 g |
Dry sample at 50 +/- 2.5C at 4 hr intervals Time in Time out |
Samples deemed to be dry when the 1 g 2 g |
differences in successive weighings Time in Time out |
is not > 0.1% of original mass 1 g 2 g |
Time in Time out |
Weight of dried sample to 0.001g M3 1 g M3 2 g |
Place in unheated muffle furnace, and Time in 1 Time out 2 |
heat to 440 +/- 25C for > 3 hrs |
Weight of ignited sample to 0.001g M4 1 g M4 2 g |
Fraction finer then 2mm = M2 W 100 |
M1 % |
Loss on Ignition = M3 - M4 W 100 |
M3 - Mc 1 % 2 % |
NOTE 1) LOI to two significant figures Mean LOI |
2) Percentage finer then 2mm to nearest 1% % |
Remarks |
Comments : |
Tested By : Date : Checked By : Date : |
Check Level (1/2/3) |
Notes : * Delete as applicable |